EN
DE
Problem: Chinese granite, dark-black
Basic cleaning
- For the basic cleaning of badly soiled surfaces.
- Stain remover, grout cleaner, high grease absorber, mould remover.
- NEUTRALISER FOR ALL ACIDIC CLEANERS!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
- Extremely powerful basic cleaner for stubborn stains.
- Also suitable as a tombstone cleaner.
- Rubber residues from vehicle tyres and rubber soles.
- For granite with high metal content (tendency to rust), e.g. Serizzo. No rusting due to rust converter!
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
Special cleaning
- Large-scale removal of lime efflorescence.
- Removes lime and cement residues. Mortar and grouting residues.
- Lime, salt and gypsum efflorescence.
- Initial cleaner for cotto and fine stoneware.
- Extremely powerful basic cleaner.
Can be diluted up to 1:20 with water depending on the degree of soiling. 1 litre is sufficient for 80 m².
Impregnation / protection
- Pre-treatment for HIGHLY ABSORBANT materials, such as sandstone, limestone, quartzite, concrete stone, terracotta and many more, before applying Finalit impregnations.
- Basic protection against stains and soiling.
- Consolidator.
- Use pre-treatment if a underfloor heating is installed.
- Use pre-treatment before laying and jointing.
- Jointing aid. Bonding agent. Limestone hardener (pyramids and the Sphinx in Egypt).
- Sandstone hardener (Petra in Jordan).
Important! As a pre-treatment for all sides (including edges) before laying, especially suitable for avoiding efflorescence, stains and joint edge discolouration.
Advantage of treatment on all sides:
- Grouting aid
- Prevents the penetration of moisture and soiling
- Prevents curling
- Prevents discolouration & flaking caused by salt, metals and frost.
- Prevents the penetration of adhesives / silicone with slabs
- Makes cleaning easier
- Protection for subsequent work, such as painter, carpenter, etc. Does not replace the need of covering against mechanical damage! The drying time is approx. 1 hour. The curing time is 24 hours.
Can be diluted 1:3 with water. 1 litre is sufficient for up to 50 m², on all sides 20 m², depending on the absorbing properties of the sub-surface.
- Long-term protection of heavily used surfaces against stains and soiling.
- Breathable. Transparent. The Goretex effect.
- Resistant to UV-rays, de-icing salt, chlorine. Food safe.
- Graffiti protection.
- For indoors and outdoors! Drying time, 1 - 2 hours, curing time, 24 hours.
- Tested by the MA 39 Testing and Research Institute of the City of Vienna.
We recommend pre-treatment with Finalit No. 21 or 21S! Use undiluted. 1 litre is sufficient for 100m².
Care
- One product for all houshold surfaces.
- pH-neutral.
- Citrus Scent
- Without acid or soap, without alcohol.
- Grease absorbant.
- Slightly glossy.
- Biodegradable.
- Environmentally friendly.
- No layer formation or streaks.
- Maintains the slip resistance.
Water-dilutable up to 1:100, also suitable for cleaning using a machine (no froth).
One product for all houshold surfaces.