ATTENTION! Remove any coatings beforehand using Finalit No. 5 Coating Remover!
Siliconise wooden connections on the floor (e.g. doorframes) with transparent silicone. 

ATTENTION! Do not handle with open flames. No smoking. Risk of ignition!

Application areas:

• Grease / oil / wax / candle wax 
• Grease rims of silicone joints

Suitable for all natural and artificial stones! You need to make your own tests!

• Use undiluted
• 1 l is sufficient for 5 m² 
• For very heavy stains, preclean with No. 1, cover the area with plastic sheet and let set over night. 
• Rinse well with water.
• Make sure to shake No. 11 before using. Apply a layer as thick as a knife with a spatula. 
• The exposure time is approx. 30 minutes. Multiple applications may be necessary with intensive soiling.
• Rinse with Finalit No.1 diluted 1:20 with water - neutralise 
• Then thoroughly wash off with water 
• You need to make your own tests.

• Especially suitable for removing candle wax from tombstones!
• Grease rims of silicone joints (there is no grease-free silicone - even marble silicone (low in grease in itself) sometimes causes grease rims or stains when exposed to heat 
• Solvent residues frequently appear as grease residues in the stone, allow to dry well 
• Application is required several times if the surface is impregnated with grease "sweating" 
• Cover with a plastic film in order to prevent premature drying; the exposure time is approx. 1 hour 
• 30% No.1 additive, increases the effect and is a replacement for solvents, large-scale application with a machine and silicone brush - no smearing with these brushes as they have stiff bristles!

• Greece: Pomegranate Spa Hotel